Table of Contents
Advertisement
Changing the unit's settings
Common procedures
Use the following procedure to change the settings if necessary.
[1]
While stopped
Press [FUNCTIONS].
[2]
Select "Other
Functions" with [
and press [ENTER].
[3]
Select "Setup" with
[
3
,
4
] and press
[ENTER].
(1) Menus
(2) Items
(3) Options
[4]
Select a menu with [
[5]
Select an item to be changed with [
press [ENTER].
[6]
Select an option with [
≥Some options require different operations. Follow the
displayed instructions.
∫ To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change
is not activated until you press [ENTER].
∫ To exit the screen
Press [RETURN] several times.
For your reference
≥The settings remain intact even if you switch the unit to standby.
Entering a password (Ratings)
You can limit play of DVDs unsuitable for some audiences (children,
for example). Play and changes to the settings are not possible
unless you enter a password.
Preparation
≥Select DVD side by pressing [DRIVE SELECT].
When setting ratings
The password screen is shown when you select levels 0 to 7.
[1]
Input a 4-digit password with the numeric buttons.
≥If you enter a wrong number, press [2] to erase it before you
press [ENTER].
≥Do not forget your password.
[2]
Press [ENTER].
[3]
Press [ENTER].
The password is entered and the unit is locked.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the TV.
Follow the on-screen instructions.
When changing ratings
The password screen is shown when you select "Ratings" (l right)
[1]
Input a 4-digit password with the numeric buttons and press
[ENTER].
Unlock Recorder:
Change Password: To change your password
Change Level:
Temporary Unlock: To temporarily unlock the unit (the unit locks
[2]
Select a desired item with [3, 4] and press [ENTER].
Actual screens depend on the operation. Follow the on-screen
instructions.
58
RQT8977
FUNCTIONS
No Disc
No Disc
Program
3
,
4
]
Copy
Other Functions
ENTER
RETURN
(1)
(2)
Setup
Off Timer
Remote Control Code
Channel
Clock Settings
Setup
Quick Start
Restore Default Settings
Disc
Video
Audio
Display
TV Screen
VHS
ENTER
,
] and press [
3
4
2
,
3
4
3
,
4
] and press [ENTER].
To unlock the unit and return the rating to 8
To change the rating level
again if you switch it to standby or open the
disc tray)
Summary of settings
This description shows the initial settings for the unit. For
details on menu operation. (l left)
≥Underlined items are the factory default settings.
≥
/
VHS.
≥
indicates settings effective for DVD only.
≥
indicates settings effective for VHS only.
∫ Channel
Signal Source (RF IN)
Select to suit the type of antenna you are using.
[Antenna] [CableTV]
(3)
Set Channels Automatically
Preset Channel Captions
6 Hours
Set Code 1
Manual Channel Captions
On
∫ Setup
Off Timer
Select how long the unit remains on when it is not being used.
[2 Hours] [6 Hours] [Off]
Remote Control Code
[Set Code 1] [Set Code 2] [Set Code 3]
,
].
1
Clock Settings
] and
Press [ENTER] to show the following settings.
Set Clock Automatically
Set Clock Manually
Adjust Time Zone
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Setup menu when the Auto
Clock Setting is not set.
j
[
1] [0] [
Quick Start
1 Sec. Quick Start for Recording on DVD-RAM°
° With the power off, recording on DVD-RAM starts about 1 second
after first pressing the [Í, DVD/VHS POWER] and then
sequentially pressing the [¥, REC] (Quick Start Mode).
Power consumption is also higher when the unit is turned off if this is
set to "On".
[On] [Off]
DivX Registration
Displays the unit's registration code. You need this registration code
to purchase and play DivX Video-on-Demand (VOD) content.
Restore Default Settings
This returns Setup menus to default settings, except for the clock,
channel settings, ratings level, and on-screen language.
[Yes] [No]
∫ Disc
Settings for Playback
Press [ENTER] to show the following settings.
Ratings
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
[8 No Limit]: All DVD-Video can be played.
[1] to [7]:
[0 Lock All]: Prohibits play of all DVD-Video.
Changing ratings (When level 0 to 7 is selected)
[Unlock Recorder] [Change Password]
[Change Level] [Temporary Unlock]
indicates settings effective for both DVD and
/
(l 17)
(l 17)
(l 18)
(l 18)
/
(l 19)
(l 20)
(l 17)
(l 20)
i
1]
(l 33)
("Entering a password (Ratings)" l left)
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
Hide quick links:
Advertisement
Table of Contents
