Panasonic DMR-ES36V Operating Instructions Manual page 59

Play DVD-Audio in Video Mode
Select "Video Mode (Video On)" to play DVD-Video content on
some DVD-Audio.
[Video Mode (Video On)] [Audio Mode (Video Off)]
Video Mode The setting returns to "Audio Mode (Video Off)"
(Video ON) when you change the disc or turn the unit off.
Audio Language
[English] [French] [Spanish] [Original] [Other ¢¢¢¢]
Subtitle Language
[Automatic] [English] [French] [Spanish] [Other ¢¢¢¢]
Menu Language
[English] [French] [Spanish] [Other ¢¢¢¢]
Choose the language for audio, subtitles and disc menus. [DVD-V]
≥If a language which is not recorded is selected, or if languages
are already fixed on the disc, the language set as the default on
the disc will be played instead.
Original
The original language of each disc will be selected.
Other ¢¢¢¢
This is the language code setting.
Input a code number with the numeric buttons.
(l 60, "Language code list")
Automatic
If the language selected for "Audio Language" is not available,
subtitles of that language will automatically appear if available
on the disc.
Settings for Recording
Press [ENTER] to show the following settings.
Recording Time in EP Mode
Select the maximum number of hours for recording in EP mode
(l 24, "Recording modes and approximate recording times (DVD)").
[EP-Extended Play (6H)] [EP-Extended Play (8H)]
EP-Extended You can record for 6 hours on an unused 4.7 GB
Play (6H) disc.
EP-Extended You can record for 8 hours on an unused 4.7 GB
Play (8H) disc.
∫ Video
Still Mode (paused video)
Select the type of picture shown when you pause play.
(l 69, "Frame and field")
[Automatic] [Field] [Frame]
Field Select if jittering occurs when "Automatic" is selected.
Frame Select if you cannot see small text or fine patterns
clearly when "Automatic" is selected.
Black Level Control
Select "Normal", "Lighter" or "Darker" to adjust the black level control
to the desired setting for picture enhancement.
Press [ENTER] to show the following settings.
Input Level
Adjusts the black level of the input signal.
[Lighter] [Darker]
Output Level (Composite/SVideo)
Adjusts the black level of the output signal from the VIDEO OUT
and S VIDEO OUT terminal.
[Lighter] [Darker]
Output Level (Component)
Adjusts the black level of the output signal from the COMPONENT
VIDEO OUT (Y/P /P ) terminals.
B R
[Lighter] [Normal] [Darker]
∫ Audio
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range (l 69) for easier listening in low volume.
[On] [Off]
Multi-channel TV sound (MTS)
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select whether to record the main or secondary audio type (SAP)
when recording or transferring (copying) to DVD-R, DVD-RW (DVD-
Video format) or +R. (You cannot select the audio type on the unit
when recording audio to DVD-R, DVD-RW (DVD-Video format) or
+R from an external device. Select it on the external device.)
[Main] [Secondary Audio Program (SAP)]
Digital Audio Output
Change the settings when you have connected equipment through
the unit's DIGITAL AUDIO OUT terminal (l 15).
Press [ENTER] to display the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
[On] [Off]
On Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Off Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Choose whether to output by "Bitstream" which
processes Dolby Digital signals on other connected
equipment or to convert the signals to "PCM (2ch)" on the unit
before output.
[Bitstream] [PCM]
Bitstream When you have connected the unit to a piece of
equipment having Dolby Digital logo.
PCM When you have connected the unit to a piece of
equipment that doesn't have Dolby Digital logo
DTS
Choose whether to output by "Bitstream" which
processes DTS signals on other connected
equipment or to convert the signals to "PCM (2ch)"
on the unit before output.
[Bitstream] [PCM]
Bitstream When you have connected the unit to a piece of
equipment having DTS logo.
PCM When you have connected the unit to a piece of
equipment that doesn't have DTS logo
° Incorrect settings can cause noise to be output which can be
harmful to your ears and speakers, and audio will not be recorded
properly on media such as mini discs.
Select Audio Channel for DV Input
You can select the kind of audio when recording from the unit's DV
in terminal. (l 52)
[Stereo 1] [Stereo 2] [Mix]
Stereo 1 Records audio (L1, R1)
Stereo 2 Records added audio such as narration (L2, R2)
subsequent to original recording.
Mix Records both Stereo 1 and Stereo 2.
° .
°
.
59
RQT8977