Notification Alerts; Fault Alert (Trip Alert); Alarm Alert; Info Alert - Siemens 7SR45 Manual

Using the Relay Fascia

4.6 Notification Alerts

4.6

Notification Alerts

Fault Alert (Trip Alert)

4.6.1
When the 7SR45 relay detects any fault, the LCD pop-ups the fault alert. The latest message updates or
replaces any earlier alert pop-up messages.

Alarm Alert

4.6.2
The alarm alert appears when any binary input is configured for general alarm and it is triggered.

Info Alert

4.6.3
The info alert displays the following required information for 2 s and the alert disappears automatically.
Table 4-4
Info Alert
56
Info Alerts
Description
This alert appears during the edit mode and the edited parameter
value blinks on the LCD. After 15 s of inactivity, the edited value of
the parameter is discarded.
This alert appears when the fault flags are reset and an LED test is
performed.
This alert appears when the fault flags are reset.
This alert appears when the reset of the fault flag has failed due to
the presence of fault current and the fault persists.
This alert appears when reset of the fault flag is failed due to the
presence of fault current. This alert also appears due to the presence
of a binary input signal during maintenance.
This alert appears when you connect to the USB host.
Enter the password twice for confirmation or changing a password.
This alert message appears when the password does not match with
the previously typed password.
This alert appears when the password entered by you contains any
special characters other than + and - or / when changing the pass-
word.
This alert appears when you select to clear the fault or event records
and the operation is successful.
Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020