Silvercrest SAB 160 B2 Operating Instructions Manual page 19

Setting the operating mode
♦ Press the MD/LD button
indicator), CD/MP3 operation (CD PLAY), USB connection (USB PLAY), memory
slot (SD PLAY), audio streaming (BT MUSIC or A2DP) and audio input (AUX).
NOTE
The operating modes CD PLAY, USB PLAY, SD PLAY and BT MUSIC can only
►
be accessed when the corresponding medium is inserted and/or a mobile
telephone is connected.
Making settings with the SEL button
♦ Press the SEL button
Each additional press of the SEL button accesses the next setting.
The following settings are available:
VOL - Volume (from 0 to 50)
BAS - Bass (from -10 to 10)
TRB - Treble (from -10 to 10)
BAL - Balance (sound distribution between the right and left speakers),
from L=R to 10L and from L=R to 10R)
FAD - Fader (sound distribution between the front and rear speakers),
from F=R to10F and from F=R to 10R)
♦ Turn the multi-controller
Further settings with the SEL button
♦ Hold down the SEL button for about 2 seconds and then keep pressing the
SEL button until the required function is shown on the display
♦ Turn the multi-controller to change the settings of the displayed menu items.
CALL LIST – call lists
NOTE
► In order to use the call list and telephone book function, a mobile tele-
phone which supports Bluetooth
to the device (see also chapter "Bluetooth
♦ Press the BD/ENT button
SAB 160 B2
to switch between radio reception (frequency
5
on the device. The current volume setting is shown.
16
3 to change the settings of the menu item displayed.
data transmission must be connected
®
®
on the device. IN CALL appears on the display.
15
.
6
operation").
GB
IE
15