Basic Operations By Using The Remote Control; Using The Auto Setup Function; Switching The Input Signal; Using The Screen Button - Panasonic PT-LX22E Operating Instructions Manual

Basic operations by using the remote control

Using the AUTO SETUP function

This function allows you to automatically adjust
Input search, Auto Keystone correction and Auto PC
adjustment during signal input from a computer.
Button
Press the <AUTO SETUP> button on the
remote control.
Note
For details, see "Setting" of Main menu. (
z

Switching the input signal

You can switch the input signals to project.
Press (<COMPUTER >,<VIDEO>,
<S-VIDEO>, or <COMPONENT>) button on
the remote control.
Switches to Computer 1(RGB)/

COMPUTER

Computer 1 (Scart) input.
VIDEO Switches to Video input.
Æ page 46)
Buttons
Switches to Computer 1(S-video)
S-VIDEO
input.
Switches to Computer 1
COMPONENT
(Component) input.

Using the SCREEN button

This function allows you to select screen mode or
change the screen size.
Button
Press the <SCREEN> button on the
remote control.
Note
For details, see "Screen" of Main menu. (
z

Using the KEYSTONE button

This function allows you to correct keystone distortion.
Button
If a projected picture still has keystone distortion after
pressing the <AUTO SETUP> button, correct the
image manually as follows:
Press the <KEYSTONE> button on the remote
control. The Keystone dialog box appears. Press
▲▼ to correct keystone distortion. The keystone
adjustment can be stored
Operation
Reduce the
upper width
with press
▲
.
Reduce the
lower width
with press
▼
.
Æ
page 44)
.
( Æ page 45)
Screen image
ENGLISH -
29