Table of Contents
Advertisement
Setting
Filter counter
This function is used to set a frequency for the filter
replacement.
1 )
Press ▲▼ to select [Filter counter].
2 )
Press ►or the <SELECT> button to
access the submenu items.
Filter counter
J
Show the total accumulated time of the filter use timer
setting.
Timer
J
To set a timer. When the projector reaches the
selected time the filter warning icon appears on the
screen.
1 )
Press ▲▼ to select [Timer] and then
press the <SELECT> button .
2 )
Press ▲▼ to set the Timer.
Select from [Off/1000H/2000H/3000H/4000H]
z
depending on the use environment.
Filter counter reset
J
After replacing the filter, be sure to reset the timer.
1 )
Press ▲▼ to select [Filter counter
reset].
2 )
Press the <SELECT> button.
[Filter counter Reset?] appears. Select Yes
z
to continue. Another confirmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
1 )
Press ▲▼ to select [Warning log].
2 )
Press ► or the <SELECT> button to
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Note
When the [Factory default] function is executed, all
z
the warning log records will be deleted.
52
- ENGLISH
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery.For more details, visit http://
www.amx.com/.
1 )
Press ▲▼ to select [AMX D.D.].
2 )
Press <SELECT> button to select [On]
or [Off] to allow the projector to be
detected by AMX Device Discovery.
Factory default
This function returns all setting values except for the
[User logo], [PIN code lock], [Logo PIN code lock],
[Lamp runtime] and [Filter counter] to the factory
default settings.
1 )
Press ▲▼ to select [Factory default].
2 )
Press the <SELECT> button.
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another confirmation dialog
box appears, select Yes to return to [Factory
default].
Advertisement
Table of Contents
