Table of Contents
Advertisement
Press as to switch the setting time.
3)
f The items will switch each time you press the button.
[0 Min]
[1 Min] ~ [30 Min]
[Filter counter]
This function is used to reset the filter use time and set the warning display.
Press as to select [Filter counter].
1)
2)
Press the <ENTER> button.
f The [Filter counter] screen is displayed.
Press as to switch the item.
3)
f The items will switch each time you press the button.
[Filter counter]
[Timer]
[Filter counter
reset]
Setting [Timer]
Press as to select [Timer].
1)
2)
Press the <ENTER> button.
Press as to switch the setting of the time.
3)
f The items will switch each time you press the button.
[Off] → [100 H] → [200 H] → [300 H]
[Filter counter reset]
Press as to select [Filter counter reset].
1)
2)
Press the <ENTER> button.
f The [Filter counter Reset?] screen is displayed.
Press as to select [Yes] and then press the <ENTER> button.
3)
f The [OK?] screen is displayed.
Press as to select [Yes] and then press the <ENTER> button.
4)
[Test pattern]
Displays the Test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before
performing various adjustments.
Press as to select [Test pattern].
1)
2)
Press the <ENTER> button.
f The [Test pattern] screen is displayed.
Press as to switch the item.
3)
68 - ENGLISH
Chapter 4 Settings - [Expand] menu
The ready mode of the power management function is continued.
From the ready mode of the power management function to the standby mode when the projector
reach the set time.
Displays the using time of the filter.
Sets the time to display the warning
Resets the filter counter.
icon.
Advertisement
Table of Contents
