Table of Contents
Advertisement
[Off]
[Gray scale 1]
[Gray scale 2]
[Gray scale 3]
[Gray scale 4]
[Color bar]
[Red]
[Green]
[Blue]
[Cross hatch]
[White]
[Black]
[Raster gray]
4)
Press the <ENTER> button.
f The selected test pattern is displayed and the menu screen is disappeared.
Note
f Press the <MENU> button to display the menu screen and select [Off] in [Test pattern] when you want to cancel the Test
pattern function.
[Network]
Initializes the settings of network before using the network function.
[Network setting]
Press as to select [Network].
1)
2)
Press the <ENTER> button.
f The [Network] screen is displayed.
3)
Press the <ENTER> button.
f The [Network setting] screen is displayed.
Press as to select an item, and change the setting according to the instructions.
4)
[DHCP]
[IP address]
[Subnet]
[Gateway]
[DNS]
Press as to select [Set], and press the <ENTER> button.
5)
f The following settings are set before the projector leaves the factory.
Note
f Before using the DHCP server, make sure the DHCP server is already functioning.
f Consult your network administrator regarding the IP address, Subnet and Gateway.
Chapter 4 Settings - [Expand] menu
Test pattern is not displayed.
Select a test pattern so that it is easy to make various adjustments.
If a DHCP server exists in the network to which the projector is connected,
[On]:
the IP address will automatically be acquired.
If a DHCP server does not exist in the network to which the projector is
[Off]:
connected, additionally set [IP address], [Subnet] and [Gateway].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
[DHCP]
[IP address]
[Subnet]
[Gateway]
[DNS]
Off
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.1
ENGLISH - 69
Advertisement
Table of Contents
