Table of Contents
Advertisement
AUTO PC adjust
Select [PC adjust] from the Main Menu (see
"Navigating through the menu" on page 32),
then select the item from the sub-menu.
Remote Control
AUTO PC adj.
[Auto PC adjustment] function is provided to
automatically adjust [Fine sync], [Total dots],
[Horizontal] and [Vertical] positions to conform to your
computer.
Press ▲▼ to select [AUTO PC adj.] and
then press the <SELECT> button.
[Please wait...]
appears while the Auto PC
z
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the [Auto PC
adjustment] can be stored in the projector. Once the
parameters are stored, the setting can be done just by
selecting a Mode (1–10) in the PC System Menu (see
page 35). See also [Store] on page 39.
Attention
[Fine sync], [Total dots], [Horizontal] and [Vertical]
z
position of some computers cannot be fully adjusted
with the [Auto PC adjustment] function. When the image
is not provided properly with this operation, manual
adjustments are required (
The Auto PC adjustment cannot be operated when [480i],
z
[576i], [480p], [576p], [720p], [1035i] or [1080i] is selected
in the PC System Menu (
Æ
Control Panel
Æ
pages 38-39).
page 35).
AUTO PC adjust
ENGLISH -
37
Advertisement
Table of Contents
