Bosch EXTEGRA IP 9000 FX Operation Manual page 21

EXTEGRA IP 9000 FX
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for
PAL cameras. The range of settings is from 1/1 to 1/10000.
Auto SensUP limit
This limits the integration time when Auto SensUP (Frame Integration) is active. The default is
1/4. The range of settings is from 1/4 to 1/30.
Shutter limit
The camera tries to hold this shutter value as long as sufficient ambient light is available in the
scene.
Settings range from 1/1 to 1/10000. The default value is 1/2000 for all modes except 'Motion'
(default 1/500).
Backlight compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of the
image. The default setting is Off.
High Sensitivity
Adjusts the level of intensity or lux within the image (HD only). Select from Off or On.
Note: In Black and White (Night) mode / low light situations, High Sensitivity turns on
automatically.
Stabilization
This feature is ideal for cameras mounted on a pole or mast, or on another location that
shakes frequently.
Select On to activate the video stabilization feature (if available on your camera) that reduces
camera shake in both the vertical and horizontal axis. The camera compensates for the
movement of the image by up to 2% of the image size.
Select Auto to activate the feature automatically when the camera detects vibration.
Select Off to deactivate the feature.
Note: This feature is not available on 20x models.
High dynamic range
Select On to activate wide dynamic range, which improves image reproduction in extreme
high-contract scenes.
Select Off to deactivate the feature.
Night mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
–
–
Night mode threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5; default 30). The lower the
value, the earlier the camera will switch to color mode.
Noise Reduction
Turns on the 2D and 3D noise reduction feature.
Bosch Security Systems
If you select this option, the camera makes the following change automatically:
– Auto Iris: switches to Constant
– Shutter: is disabled
Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.
Color: The camera does not switch to Night Mode regardless of ambient light conditions.
Auto (default): The camera switches out of Night Mode after the ambient light level
reaches a pre-defined threshold.
Operation Manual
Configuration via IP, Advanced Mode | en 21
2015.03 | 1.0 |