Basic Mode: Encoder - Bosch EXTEGRA IP 9000 FX Operation Manual

EXTEGRA IP 9000 FX
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1.
2.
DHCP
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you
can activate acceptance of IP addresses automatically assigned to the camera. Certain
applications (VIDOS, Bosch Video Management Systems, Archive Player, Configuration
Manager) use the IP address for the unique assignment of the unit. If you use these
applications, the DHCP server must support the fixed assignment between IP address and
MAC address, and must be appropriately set up so that, once an IP address is assigned, it is
retained each time the system is rebooted.
IP address
Enter the desired IP address for camera in this field. The IP address must be valid for the
network.
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter
the IP address of the gateway here. Otherwise leave the box as 0.0.0.0.
4.4

Basic Mode: Encoder

Non-recording profile
You can select a profile for encoding the video signal.
You can use this to adapt the video data transmission to the operating environment (for
example, network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field.
Default Profile name
HD Image Optimized
HD Balanced
HD Bit Rate Optimized
SD Image Optimized
SD Balanced
SD Bit Rate Optimized
Bosch Security Systems
Make the desired changes.
Click the Set and Reboot button. The camera reboots and the changed settings are
activated.
Description
For an HD image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
For an HD image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
For an HD image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
For an SD image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
For an SD image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
For an SD image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
Operation Manual
Configuration via IP, Basic Mode | en 9
2015.03 | 1.0 |