Table of Contents
Advertisement
EXTEGRA IP 9000 FX
Notice!
For more information about the camera settings and controls, click the Help on this page?
link to open the online help.
6.1.6
Digital I/O
The alarm icon is for information purposes and indicates the status of an alarm input: When an
alarm is triggered, the icon lights up blue. The device's configuration determines whether the
alarm is displayed, as well as additional details. Refer to the online help for more information.
Triggering Relay
You can switch connected units using the relays in the camera (for example, lights or door
openers).
4
6.1.7
System Log/Event Log
System Log
The System Log field contains information about the operating status of the camera and the
connection. You can save these messages automatically in a file (see the online help).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file (see the online help).
1.
2.
6.1.8
Audio
Audio function
All users who are connected to the camera via Web browser can receive audio signals from the
camera. Audio signals can only be sent to the camera by the user who connects to the unit
first.
1.
2.
Bosch Security Systems
To activate this, click the icon for the relay next to the video image. The icon will be red
when the relay is activated.
If you want to delete the entries, click the delete icon in the top right-hand corner of the
relevant field.
If you want to view a detailed log, click the icon in the top right-hand corner of the
relevant field. A new window will open.
On the LIVE page, click anywhere next to the video image to remove the focus from the
ActiveX.
Hold down the F12 key to establish a voice connection to the camera. The browser's
status bar displays the message Send Audio ON.
Operation Manual
Operation | en
47
2015.03 | 1.0 |
Advertisement
Table of Contents
