Table of Contents
Advertisement
42
en | Configuration via IP, Advanced Mode
4.
Once the upload is complete, the new configuration is activated. The time remaining is shown
by the message going to reset Reconnecting in ... seconds. The unit reboots automatically
once the upload has successfully completed.
Download
1.
2.
Configuration
You can save configuration data for the camera on a computer and then load saved
configuration data from a computer to the unit.
Maintenance log
You can download an internal maintenance log from the unit to send it to Customer Service
for support purposes. Click Download and select a storage location for the file.
5.47
Licenses
You can enter the activation key to release additional functions or software modules.
Notice!
The activation key cannot be deactivated again and is not transferable to other units.
5.48
System Overview
The data on this page are for information purposes only and cannot be changed. Keep a
record of this information in case technical assistance is required.
Notice!
You can select all required text on this page with the mouse and copy it to the clipboard with
the [Ctrl]+[C] key combination, for example if you want to send it via e-mail.
2015.03 | 1.0 |
Click OK to the warning message to continue the firmware upload, or Cancel to stop the
upload.
The page displays a progress bar as the firmware is uploaded.
Note: Once the progress bar reaches 100%, the system opens the reset page. Allow the
reset page to complete its action.
Click the Download button. A dialog box opens.
Follow the on-screen instructions to save the current settings.
Operation Manual
EXTEGRA IP 9000 FX
Bosch Security Systems
Advertisement
Table of Contents
