Connecting The Power Cord; Removing The Handles - Sharp PN-H801 Operation Manual

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
TIPS
• When installing the monitor in landscape orientation, be sure to clamp the power cord (supplied) onto the cable clamp
attachment using the supplied cable clamp (for power cord). When clamping the power cord, take care not to stress the
terminal of the power cord. Do not bend the power cord excessively. For information on how to attach the cable clamp, see
page 15.
The handles can be removed.
Handle
Caution
• The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.
• To attach handles, be sure to use the handles and handle screws which were removed from this monitor.
• Be sure the handles are attached securely.
14
E

Connecting the Power Cord

Power cord (Supplied)
Cable clamp (for power cord)

Removing the Handles

Handle screws
Main power switch
1
AC input terminal
3 For power
outlet
Power cord (Supplied)
2