Table of Contents
Advertisement
Caution
• Turn on the monitor first before turning on the PC or
playback device.
Turning on the main power
Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When turning the power off and back on, always wait for at
least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
Turning Power On/Off
Turning power on/off
Press the POWER button or POWER switch to turn the power
ON/OFF.
Status
Green lit
Orange lit
Green flashing
It is possible to check the power LED even when the operation
panel is stored inside the monitor.
Caution
• When turning the power off and back on, always wait for at
least 5 seconds. A short interval may result in a malfunction.
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• In the input signal waiting mode, the power turns on when
the POWER button on the remote control or the POWER
switch on the monitor is pressed. No other operations can
be performed.
• The power on turns on from the input signal waiting mode
(the power "on" state is entered) by signal input only when
INPUT SIGNAL ON in MONITOR menu is set to YES and a
when signal is input into the currently selected terminal.
Disabling power on/off operations
Power on/power off operations can be disabled in order to
protect the monitor from an accidental power off. Set the
POWER BUTTON LOCK in FUNCTION menu. (See page 30.)
Power switch
Power LED
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
Power LED
17
E
Advertisement
Table of Contents
