Adjusting The Feet; Electrical Connection - Beko WMB 81241LS User Manual

4.4.6 Adjusting the feet

A
CAUTION:
free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.
Otherwise, the product may move from its place and cause crushing and vibration problems.
CAUTION:
damaged.
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.

4.4.7 Electrical connection

Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not
be liable for any damages that will arise when the product is used without grounding in
accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 13 Amps, have a
qualified electrician install a 13 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to your
mains voltage.
• Do not make connections via extension cables or multi-plugs.
B
wArNINg:
16 / EN
In order to ensure that the product operates more silently and vibration-
Do not use any tools to loosen the lock nuts. Otherwise, they will get
Damaged power cables must be replaced by the Authorised Service Agents.
Washing Machine / User's Manual