Draining Remaining Water And Cleaning The Pump Filter - Beko WMB 81241LS User Manual

4.7.5 Draining remaining water and cleaning the pump filter

The filter system in your product prevents solid items such as buttons, coins and fabric
fibers clogging the pump impeller during discharge of washing water. Thus, the water will
be discharged without any problem and the service life of the pump will extend.
If the product fails to drain water inside it, the pump filter is clogged. Filter must be cleaned
whenever it is clogged or in every 3 months. Water must be drained off first to clean the
pump filter.
In addition, prior to transporting the product (e.g., when moving to another house) water
should be drained completely.
A
CAUTION:
cause noise problem.
CAUTION:
must be removed and the water inside the product must be drained when the product is not
in use.
CAUTION:
In order to clean the dirty filter and discharge the water:
1 Unplug the product to cut off the supply power.
A
CAUTION:
the burning risk, clean the filter after the water inside the product is cooled down.
2. Open the filter cover.
39 / EN
Foreign substances left in the pump filter may damage your product or may
In regions where freezing is possible, the faucet must be closed, system hose
After each use, turn off the water tap to which the mains hose is connected.
Temperature of the water inside the product may rise up to 90 ºC. To avoid
If the filter cap is composed of two
pieces, press the tab on the filter cap
downwards and pull the piece out
towards yourself.
If the filter cap is one piece, pull the cap
from both sides at the top to open.
You can remove the filter cover by
slightly pushing downwards with a thin
plastic tipped tool, through the gap
above the filter cover. Do not use metal
tipped tools to remove the cover.
Washing Machine / User's Manual