Problem
Laundry remains wet at the
end of the programme. (*)
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to
prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-
spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION:
section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional
product yourself.
Reason
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this
Solution
• Use recommended amount of
detergent.