Panasonic DMR-HWT260 Operating Instructions Manual page 38

Dividing title
1 Select "Divide Title" in "Edit", then press [OK].
2 Press [OK] at the point to divide the title.
• You can find the desired point by using play,
search, etc. ( 33)
3 Select "Continue", then press [OK].
4 Select "Divide", then press [OK].
To confirm the division point
After performing step 2.
Select "Preview", then press [OK].
• The unit plays 10 seconds before and after the
division point.
To change the division point
After performing step 2.
Restart play and select "Divide", then press [OK]
at the division point.
• Divided titles will become a group of titles.
File Conversion
File Conversion is a function to convert the
recording mode of the title in DR mode and
AVCHD contents. The size of the converted title
will be small regularly. It will take about the same
time as the recorded duration.
1 Select "File Conversion" in "Edit", then press
[OK].
e.g., [For_New_Zealand]
File Conversion
Convert the selected title by changing its recording mode.
Please select recording mode and other options, then press OK.
Recording Mode
Subtitles
Audio Description
Timing
38
SQT1332
HL -- Longer Play
Off
Off
During standby
OK
RETURN
2 Set the conversion options, then press [OK].
Recording Mode (
• [USB_HDD] You cannot select XP, SP, LP and
EP mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the title.
• Off
Subtitle will not be recorded.
[For_New_Zealand] Audio Description:
• Automatic
Audio Description will be recorded if they are
included in the title.
• Off
Audio Description will not be recorded.
Timing:
• Now
Conversion begins immediately after step 4.
• Timer recording will not be performed
during conversion.
• During standby
Conversion will be performed after the unit is
switched to standby mode.
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
4 "Now" conversion:
Select "Start", then press [OK].
"During standby" conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
"COPY" or "CONV" on the front panel display
remains lighted during conversion.
16):