Table of Contents
Advertisement
VIERA Link functions
Convenient
functions
What is VIERA Link?
VIERA Link is a convenient function which will link the
operations of this unit and a Panasonic TV (VIERA) or
an amplifier/receiver. You can use this function by
connecting the equipment with the HDMI cable. See
the operating instructions for connected equipment.
Automatic input switching/
Power on link
When the following operations are performed, the input
channel of the TV will be automatically switched and
the screen of this unit will be displayed. Additionally
when the TV is off, the TV will automatically turn on.
- When play starts on this unit
- When an action that uses Video Menu etc, is
performed
Power off link
When you set the TV to standby mode, this unit is
also automatically set to standby mode.
• Power off link function does not work when
manual recording, copying etc.
Playing music continuously even after
turning off power to the TV
The following operations make it possible to keep the
power of the unit on and to play music continuously.
When the unit is directly connected to an
amplifier/receiver.
1 While playing music: Press [OPTION].
2 Select "TV Power Off", then press [OK].
• Sound may be discontinued for several seconds
when the power to the TV is turned off.
Easy control only with Panasonic TV's
remote control
You can operate this unit using the TV remote control.
Refer to the operating instructions of the TV about
the buttons that you can use.
• VIERA Link, based on the control functions provided by HDMI
which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed
and added. As such, its operation with other manufacturers'
equipment that supports HDMI CEC cannot be guaranteed.
• These functions may not work normally depending on the
equipment condition.
• Use the remote control supplied with this unit if you cannot
operate this unit using buttons on the TV remote control.
54
SQT1332
Software (Firmware)
Update
You cannot operate the unit until the update
is complete. Don't remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
Software of this unit can be updated automatically
by the following methods at the specified time.
(Default setting is 3 a.m.
in Standby)
• From broadcasts ([For_New_Zealand])
Software of this unit will be updated from
broadcasts if update information is detected.
• From Internet
Network connection and setting are required.
(
10, 12)
If a software (firmware) update is available, a
notification is displayed.
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
• It is displayed on the Channel Information
(
18) when the Software (Firmware) can be
updated immediately.
e.g.,
NEWS
1
XXXXX - XXXXX
Now
Rating: G
Dolby D
To execute, press the red button while the
Channel Information is displayed, and follow the
instructions on the screen.
Update of the software (firmware) will start when
the unit is turned to standby mode.
64, Software Update
XXXXXX
All Digital Channels
Software update
Change category
Hide quick links:
Advertisement
Table of Contents
