Panasonic DMR-HWT260 Operating Instructions Manual page 68

TV Guide
The TV Guide information is not displayed
properly.
• Set the clock correctly. (
• There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
• If signal quality is bad, the TV Guide system
may not be able to receive any data.
• It may take time until the TV Guide screen is
displayed correctly. Wait for about a day.
Broadcast
Picture regularly breaks up on some channels.
• Adjust the reception with "Manual Tuning". (
Network
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. ( 10, 12)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
- Conversion Setting for DLNA (
- Resolution Setting for DLNA (
68
SQT1332
64, Clock)
57)
62)
62)
You cannot play contents properly from DLNA
compatible equipment on the network.
• There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
• Following titles may not be played back:
- A title with access restriction
- A title with incompatible format
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While simultaneously copying and recording
- While displaying the Basic Settings menu
- While executing functions using a network,
such as Network Service
• [For_New_Zealand] If the DLNA compatible
equipment is not capable of outputting HE-AAC
audio format, etc., sound may not be played
back.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
• Use 802.11n (2.4 GHz or 5 GHz) Wireless
router.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
• On the "Wireless Settings" screen (
continuous lighting of at least four "Reception"
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your Wireless router. If there is no
improvement, connect to a wired network and
perform the "Easy Network Setting" (
again.
Reset
To return all the settings to the factory preset
Perform "Shipping Condition" or "Default
Settings". ( 64)
61), the
12, 61)