Connection - Panasonic DMR-HWT260 Operating Instructions Manual

Connection

3D programmes or 4K images can be played back when this unit is connected to a 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic's HDMI cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
The HDMI-compliant cable is supplied with this unit.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (
Basic connections
To the aerial
RF coaxial cable
(supplied)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
• Keep the RF coaxial cables as far away as possible from other cables.
Aerial cable
70)
HDMI cable
(supplied)
VHF/UHF
HDMI
RF IN
This unit's rear panel
9
SQT1332