W@P Test Procedure - Philips Fisio 120 VOICE Service Manual

Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans

8.5 W@P Test Procedure

With regard to the mobile phones only four things can prevent the W@P applications to operate properly :
·
The Mobile Phone is not W@P able
·
Registration problem
·
A bad configuration
·
The mobile has a deficient Radio part.
So that's why to solve W@P problems the following process must be observed.
Ø Ensure about the W@P capability of the mobile phone.
Ø Interrogate the customer regarding his operator registration.
Ø Check with the customer that all the needed parameters are stored in the phone memory
Ø Perform a functional and a radio test of the mobile phone.
The W@P Test procedure as to be performed only if the customer complains about W@P applications.
8.5.1 Functional and radio test
Before starting the W@P procedure it must be assumed that the functional test and the radio test have been done
successfully.
(Refer to chapters 8.1 & 8.2)
8.5.2 W@P parameters settings
Press OK to access the
menu
Ó PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
(W@P & data/fax options should be needed depending on the operator)
(wrong W@P parameters)
( a quick test has to be performed to check memory reliability)
(to be checked using the Operator Simcard)
Press the Compass key
left or right to find Access
settings and press OK
COMPANY RESTRICTED
VY-V-640-120-2
Page : 29 of 45
Language : EN
Date : 23/04/02
Several W@P
configurations can be
stored. Select one
VY-V-640-
Press the Compass key
left or right to find Change
and press OK