Beko WTV 7531 X0 User Manual page 15

5 Maintenance and cleaning
Service life of the product extends and frequently faced problems
decrease if cleaned at regular intervals.
5.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every 4-5 washing
cycles) as shown below in order to prevent accumulation of powder
detergent in time.
Lift the rear part of the siphon to remove it as illustrated.
C
If more than normal amount of water and softener mixture
starts to gather in the softener compartment, clean the siphon.
2 Wash the detergent drawer and the siphon with plenty of
lukewarm water in a washbasin. Wear protective gloves or use an
appropriate brush to avoid touching of the residues in the drawer
with your skin when cleaning.
3 After cleaning, replace the siphon back to its seating and push
its front section downwards to make sure that the locking tab
engages.
5.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see Operating
the product - Programmes.
For products without drum cleaning, follow the below steps to clean
the drum:
Select Additional Water or Extra Rinse auxiliary functions. Use
a Cottons programme without pre-wash. Set the temperature
to the level recommended on the drum cleaning agent
which can be provided from authorized services. Apply this
procedure without any laundry in the product. Before starting
the programme, put 1 pouch of special drum cleaning agent (if the
special agent could not be supplied, put max. 100 g of powder anti-
limescale) into the main wash detergent compartment (compartment
no. "2"). If the anti-limescale is in tablet form, put only one tablet into
the main wash compartment no. "2". Dry the inside of the bellow with
a clean piece of cloth after the programme has come to an end.
C
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
After every washing check that no foreign substance is left in the
drum.
15 / EN
If the holes on the bellow shown in the figure is blocked, open the
holes using a toothpick.
C
Foreign metal substances will cause rust stains in the drum.
Clean the stains on the drum surface by using cleaning agents
for stainless steel. Never use steel wool or wire wool.
A
WARNING:
Never use sponge or scrub materials. These will
damage the painted and plastic surfaces.
Washing Machine / User's Manual