Beko WTV 7531 X0 User Manual page 7

2.6 Adjusting the feet
A
CAUTION:
In order to ensure that the product operates
more silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting the
feet. Otherwise, the product may move from its place and
cause crushing and vibration problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and balanced.
3. Tighten all lock nuts again by hand.
A
WARNING:
Do not use any tools to loosen the lock nuts.
Otherwise, they will get damaged.
2.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse.
Our company shall not be liable for any damages that will arise when
the product is used without grounding in accordance with the local
regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than
16 Amps, have a qualified electrician install a 16 Amp fuse.
• The voltage specified in the "Technical specifications" section
must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
B
DANGER:
Damaged power cables must be replaced by the
Authorized Service Agents.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product.
4. Install transportation safety bolts in the reverse order of removal
procedure;
C
NOTE :
Never move the product without the transportation
safety bolts properly fixed in place!
A
CAUTION:
Packaging materials are dangerous to children.
Keep packaging materials in a safe place away from reach
of the children.
7 / EN
3 Preparation
3.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and degree of
soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.
3.2 Preparing laundry for washing
• Laundry items with metal attachments such as, underwired bras,
belt buckles or metal buttons will damage the machine. Remove
the metal pieces or wash the clothes by putting them in a laundry
bag or pillow case.
• Take out all substances in the pockets such as coins, pens and
paper clips, and turn pockets inside out and brush. Such objects
may damage the product or cause noise problem.
• Put small size clothes such as infant's socks and nylon stockings
in a laundry bag or pillow case.
• Place curtains in without compressing them. Remove curtain
attachment items.
• Fasten zippers, sew loose buttons and mend rips and tears.
• Wash "machine washable" or "hand washable" labeled products
only with an appropriate programme.
• Do not wash colours and whites together. New, dark coloured
cottons release a lot of dye. Wash them separately.
• Tough stains must be treated properly before washing. If unsure,
check with a dry cleaner.
• Use only dyes/colour changers and limescale removers suitable
for machine wash. Always follow the instructions on the package.
• Wash trousers and delicate laundry turned inside out.
• Keep laundry items made of Angora wool in the freezer for a few
hours before washing. This will reduce pilling.
• Laundry that are subjected to materials such as flour, lime dust,
milk powder, etc. intensely must be shaken off before placing
into the machine. Such dusts and powders on the laundry may
build up on the inner parts of the machine in time and can cause
damage.
3.3 Things to be done for energy saving
Following information will help you use the product in an ecological
and energy-efficient manner.
• Operate the product in the highest capacity allowed by the
programme you have selected, but do not overload; see,
"Programme and consumption table".
• Always follow the instructions on the detergent packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small quantities of lightly soiled
laundry.
• Do not use prewash and high temperatures for laundry that is not
heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select the highest spin
speed recommended during washing process.
• Do not use detergent in excess of the amount recommended on
the detergent package.
3.4 Initial use
Before starting to use the product, make sure that all preparations
are made in accordance with the instructions in sections "Important
safety instructions" and "Installation".
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If your product is not equipped with
Drum Cleaning programme, perform the Initial Use procedure in
accordance with the methods described under "5.2 Cleaning the
loading door and the drum" section of the user manual.
C
NOTE :
Use an anti-limescale suitable for the washing
machines.
NOTE :
Some water might have remained in the product
due to the quality control processes in the production. It is not
harmful for the product.
Washing Machine / User's Manual