Husqvarna Z 246 Operator's Manual page 2

Labels are placed on the engine and/or in the engine compartment stating that the machine
will fulfill the requirements. This is also applicable to special requirements for any of the states,
(California emission rules etc.). Do not remove these labels. Certificates can also be supplied
with the machine at delivery or written in the Engine manual. Be careful with them because
they are valuable documents.
WARNING! Failure to obey careful
operating practices can result in dangerous
injury to the operator or other persons. The
owner must understand these instructions,
and must let only approved persons who
understand these instructions to operate the
mower.
Each person operating the mower must be of
sound mind and body and must not be under
the influence of mind altering substances.
WARNING! Engine exhaust, some of its
constituents, and some vehicle components
contain or emit chemicals known to the State
of California to cause cancer and birth defects
or other reproductive harm.
WARNING! Battery posts, terminals
and related accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm. Clean your hands
after handling.
CONFORMITY CERTIFICATES
USA requirements
©2016 All rights reserved.
Orangeburg, SC Printed in U.S.A.
WARNING! Engine exhaust and some
vehicle components contain or emit chemicals
thought to cause cancer, birth defects, or other
damage to the reproductive system. The
engine exhaust contains carbon monoxide,
which is an odorless, colorless, poisonous gas.
Do not use the machine in closed spaces.
When this product is worn out and no longer
used, return it to the reseller or other party for
recycling.
To make improvements, specifications and
designs can be altered without notification.
Note that no legal demands can be placed
based on the information contained in these
instructions.
Use only original parts for repairs. The use of
other parts voids the warranty.
Do not change or install non-standard
equipment to the unit without consent from
the manufacturer. Modifications to the unit can
cause unsafe operations or damage the unit.