Network Menu - Notifications Menu - Epson EB-696Ui User Manual

Projector Network Settings - Network Menu

Network Menu - Notifications Menu

Settings on the Notifications menu let you receive an email notification if a
problem or warning occurs in the projector.
Network > Network Configuration > Notifications
s
Setting Options
Mail Notification On
Off
SMTP Server IP address
Port Number 1 to 65535 (default
is 25)
Description
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Select a number for the SMTP server
Port Number.
Setting Options
From Up to 32
alphanumeric
Address 1 Setting
characters
Address 2 Setting
Up to 64
Address 3 Setting
alphanumeric
characters from the
Web browser
(do not use " ( ) , : ;
< > [ \] spaces)
SNMP On
Off
Trap IP Address 1 IP address
Trap IP Address 2
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
PJLink Notification On
Off
187
Description
Enter the email address of the sender.
Enter the e-mail address, and select the
alerts you want to receive. Repeat for up
to 3 addresses.
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
The default value is Off.
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Set the SNMP community name.
Enables or disables the PJLink
notification function.