Projector Placement; Projector Setup And Installation Options; G G Related Links - Epson EB-696Ui User Manual

Projector Placement

You can install the projector on a wall, or place it on a table to project images.
You need the optional mounts when suspending the projector from a ceiling,
installing it on a wall, or placing it vertically on a table.
Note the following points when selecting a projector location:
• Place the projector on a sturdy, level surface or install it using a compatible
mount.
• Leave plenty of space around and under the projector for ventilation, and
do not place it on top of or next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or
extension cord.
• Place the projector parallel to the screen.
If you cannot install the projector parallel to the screen, correct
a
keystone distortion using the projector controls.
Warning
• A special method of installation is required when suspending the projector from
a wall or ceiling. If you do not install the projector correctly, it could fall and
cause damage or injury.
• Do not use adhesives on the wall mount plate fixing points or the ceiling mount
fixing points to prevent the screws from loosening, or use lubricants, oils, or
similar substances on the projector; the projector case may crack causing it to fall
from its mount. This could cause serious injury to anyone under the mount and
could damage the projector.
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
Attention
• If you are using the projector at altitudes above 1500 m, set the High Altitude
Mode setting to On in the projector's Extended menu to ensure the projector's
internal temperature is regulated properly.
s Extended > Operation > High Altitude Mode
• Try not to setup the projector in locations subject to high humidity and dust, or
in locations subject to smoke from fires or tobacco smoke.

g g Related Links

• "Projector Setup and Installation Options"
• "Settings when Using the Interactive Features"
• "Image Shape" p.55
• "Optional Accessories and Replacement Parts"
• "Projector Setup Settings - Extended Menu"

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
Front/Rear
Attach the feet (if supplied) when using the projector on a surface such
a
as a desk.
23
p.23
p.24
p.234
p.177