You may need to clean the projection window and obstacle sensor periodically, and clean the air filter and air vents to prevent the projector from overheating due to

blocked ventilation.

The only parts you should replace are the lamp, air filter, remote control batteries, interactive pen batteries, and interactive pen tips. If any other part needs replacing,

contact Epson or an authorized Epson servicer.

Warning

Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous

electrical voltages in the projector can injure you severely.

g g Related Links

• "Cleaning the Projection Window"

• "Cleaning the Obstacle Sensor"

• "Cleaning the Projector Case"

• "Air Filter and Vent Maintenance"

• "Projector Lamp Maintenance"

• "Replacing the Remote Control Batteries"

• "Replacing the Interactive Pen Battery"

• "Replacing the Interactive Pen Tip"

p.199

p.200