Table of Contents
Advertisement
Projector Network Settings - Network Menu
Setting
Options
Notified IP Address IP address
Network Menu - Others Menu
Settings on the Others menu let you select other network settings.
Network > Network Configuration > Others
s
Setting
Options
Priority Gateway
Wired LAN
Wireless LAN
Description
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Description
You can set the priority gateway.
Setting
Options
AMX Device
On
Discovery
Off
Crestron
On
RoomView
Off
Control4 SDDP
On
Off
Message
On
Broadcasting
Off
Network Menu - Reset Menu
Settings on the Reset menu let you reset all of the network settings.
188
Description
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Set to On only when monitoring or
controlling the projector over the
network using Crestron RoomView.
Enabling Crestron RoomView disables
the Epson Message Broadcasting feature
in the EasyMP Monitor software.
Set to On to allow device information to
be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
Set to On to enable EPSON Message
Broadcasting feature.
You can download Message Broadcasting
and its Operation Guide from the
following Web site.
http://www.epson.com/
Hide quick links:
Advertisement
Table of Contents
