D-Link DVC-1100 Manual page 12

Using the Setup Wizard (continued)
Wireless Settings Screen
The Wireless Settings screen
shows the SSID of the selected
wireless device the DVC-1100
will attach to and allows setting
t h e D V C - 1 1 0 0 f o r W E P
e n c r y p t i o n . The DVC-1100
has WEP encryption disabled
by default.
Encryption will make your wireless
network more secure, but may
slow down the network due to the
increased traffic caused by the
encryption.
SSID
The SSID name selected on the Wireless Site Survey screen appears here.
It can be entered/edited using the on-screen keyboard. This may be necessary
if a SSID does not appear in the Wireless Site Survey screen because SSID
broadcast feature is disabled on the wireless router or access point.
Auth Type
Press the down arrow on the remote to select the authentication type
Type). Select one of the authentication types by pressing Enter. The
authentication type must match the type used by the wireless network if
encryption is enabled.
Open System: Communicates the key across the network.
Shared Key: Allows communication only with devices with identical
encryption settings.
WEP (Wired Equivalent Privacy) is an industry standard encryption
technology used by 802.11b wireless devices. See "WEP" in the
Glossary for more details.
i2eye AP
(Auth
12