D-Link DVC-2000 Manual page 59

Broadband desktop videophone
Hide thumbs Also See for DVC-2000:
Table of Contents

Advertisement

DVC-2000 User's Manual
11. Audio stops during a call
Far side muted their audio. If the far side mutes their audio you will not be able to
hear him or her.
Network is congested. Give the VideoPhone a couple of minutes to try to recover,
or disconnect the call and try again at a later time.
12. Audio has an echo
Far side television is too loud. The far side audio volume needs to be turned
down.
13. Excessive delay during a conversation
Incorrect network speed settings (too fast). Decrease the send/receive speeds
from the Settings>Network>Speed screen and attempt the call again.
14. Error
Unable to find the Update Server.
No connection to the Internet.
Local setting may be incorrect.
Firewall not allowing FTP out.
In the above cases, consult your router manual/network adminstrator.
Update Server is temporarily unavailable.
If the Update Status Icon is the only one showing as "failed", you will not be prevented
from making and receiving videocalls.
15. Error
VideoPhone cannot obtain public IP address (Router's address). See
"VideoPhone cannot obtain IP address automatically" section, #18.
16. Error
VideoPhone could not register with the Directory Service. Sometimes it takes
the VideoPhone up to ten minutes to register. Verify all network settings, including
DNS. Check your network settings. If this is the only Status Icon showing as
"failed", you will not be able dial a videophone number to make a call. It will be
necessary to dial using an IP address.
17. Upon starting the image in the Main window has a red or yellow
tint
Enable Automatically adjust video contrast under Settings > Video.
D-Link Systems, Inc.
displays on Main Screen.
displays on main screen.
displays on main screen.
Network Configuration
59

Advertisement

Table of Contents
loading

Table of Contents