Print Server Wireless Setting In Ps Admin Program - D-Link DP-G310 User Manual

Print Server Administration User's Guide
PRINT SERVER WIRELESS SETTING IN
PS ADMIN PROGRAM
Installation procedure for wireless print server consists of two
modes. Ad-hoc and infrastructure mode each with it's own setting.
In the ad-hoc mode it provides direct communication between
PC/Notebook and print server with setting to the same wireless
channel and ESS-ID. In infrastructure mode communication
between PC/Notebook and print server is through the Access Point
acting as a bridge between wired and wireless network with ESS-
ID setting matching the Access Point.
NOTE: The following contains important information about what steps
need to be taken to prepare for your wireless print server
setting. If your print server is not a wireless print server please
skip this chapter.
11

PRINT SERVER WIRELESS SETTING IN PS ADMIN PROGRAM