Setting A Password For Your Print Server; Ps Admin - D-Link DP-G310 User Manual

Print Server Administration User's Guide
Your print server will now be accessible under the new name.

Setting a Password for Your Print Server

Unless you set a password, anyone on your network will be able to
change your print server's settings.
connected to the Internet, then it may be possible to change your
print server's configuration from anywhere in the world using the
telnet
should set a password for your print server, and record it in a safe
place.
To set the print server's password,
1. Select the print server in the PS Admin main window's
server name display (or extended server display).
2. Choose Server Device... from the Configuration menu, or
press the Configure Server button in the toolbar. (If you
have already assigned a password to the server, you will
have to enter it at this point.) PS Admin will display the
Server Device Configuration window.
3. In the Password field, enter the password you have chosen
for the server, and press OK.
4. PS Admin will ask you to confirm your new password. Enter
the password a second time and press OK.
24
interface. To protect your print server's integrity, you
Getting Started Setting up Your Print Server
If your local network is