Changing Tcp/Ip Settings - D-Link DP-G310 User Manual

Print Server Administration User's Guide
Where
ip-address
print server.
When you first
message. At this point you can enter the password you have
assigned to your print server. If you have not yet assigned a
password, just press Enter.
The print server will then display the

Changing TCP/IP Settings

Once you have set the print server's IP address for the first time
(using the method described above), you may wish to change the
address or other TCP/IP configuration information such as the
local network mask, or the default gateway. To change these
TCP/IP settings,
1. From the main menu, choose TCP/IP Configuration. The
print server will display the TCP/IP Configuration menu.
84
is the IP address you have assigned to the
to the print server, it displays its log-in
telnet
telnet
Appendix: Telnet Interface Administration
interface main menu.