Upgrading Print Server Firmware - D-Link DP-G310 User Manual

WARNING: Do not perform a factory reset unless you are absolutely sure
this is what you want. All settings, including the print server's
TCP/IP network address, will be erased and replaced with their
original values.
To reset the print server,
1. Choose Tools from the Main Menu.
[Tools]
1 - Reset
2 - Factory Reset
3 - Download Firmware
0 - Return to Main Menu
Enter Selection:
2. Choose the Reset or Factory Reset menu item, depending on
the type of reset you wish to perform. The print server will
ask for confirmation.
3. Confirm the reset by entering
telnet connection will drop, and the print server will reset
itself. If you selected Factory Reset, all of the print server's
default configuration values will be restored.

Upgrading Print Server Firmware

The print server's internal software is stored in Flash memory,
which allows you to upgrade it to an updated version without
shipping the print server back to your distributor. Consult your
dealer for information about when updated print server firmware
versions are available.
Appendix: Telnet Interface Administration
Print Server Administration User's Guide
and pressing Enter. The
y
93