Table of Contents
Advertisement
I
E
C
DENTIFYING
XTERNAL
OMPONENTS
This chapter describes the front panel, rear panel and LED indicators of the
DWL-P1012.
Front Panel Components
The front panel of the DWL-P1012 consists of twelve (12) 10/100Mbps Fast
Ethernet data ports (data only), twelve (12) 10/100Mbps Fast Ethernet PoE
ports (data + DC power), one (1) 10/100Mbps Ethernet/Fast Ethernet port for
out of band management and a Reset button.
Data port (upper row of ports): Twelve 10/100Mbps Fast Ethernet data ports.
PoE port (lower row of ports): Twelve 10/100Mbps Fast Ethernet data with
DC power output ports.
Management port: One 10/100Mbps Fast Ethernet out of band management
port.
LED Indicators: Comprehensive LED indicators that display the conditions of
the DWL-P1012 and status of the network. A description of these LED indicators
follows.
Reset button: The Reset button is to reset all device settings back to factory
defaults.
Note: The Midspan supports PoE port priority management. When the available
system power is less than required by the PD, the Midspan will enforce PoE port
priority management where the lower port number will have higher priority than
the higher port number, Port 1 > Port 2 > ... > Port 12. This means that a device
connected to Port 1 will receive Power before a device connected to Port 2. Be
sure to create a configuration backup once the device configuration is complete.
In the event of an accidental reset the backup can be loaded through the Web-
UI or Web Smart Utility to save time.
8
Advertisement
Table of Contents
