Trap Setting - D-Link DWL-P1012 User Manual

Trap Setting

The Trap Setting enables the DWL-P1012 to monitor the selected Events
through the Web Management Utility, configure the Trap IP Address of the
manager where the trap should be sent.
System Events: Monitoring the system's Status.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when a wrong password is used in a login attempt. The IP
address of the source will be recorded.
PoE Events: Monitoring the PoE ports status.
PoE Power fail: a trap when the port's power source has failed.
Power on/Power off: a trap when the PoE port's power is on and down.
Power over current: a trap when the PoE port's power is over current.
Power short circuit: a trap when the PoE port's power circuit was short.
38