Device Setting - D-Link DWL-P1012 User Manual

The symbol " " represents a new trap signal has arisen, this symbol will
disappear after you review and click on the event record.
Add Item: To add a device to the Monitor List manually, enter the IP Address of
the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.
Note: In order to receive Trap information using the utility, the DWL-P1012 has
to be configured with the appropriate Trap IP and Trap Events first.

Device Setting

You may configure the device by using the function key in the Device Setting
Dialog box.
Configuration Setting: In the Configuration Setting, you may configure the IP
Address, Subnet Mask, Default Gateway, Set Trap to (Trap Host IP Address),
System name and Location.
Select the device in the Discovery list or Monitor List and press this button, then
the Configuration Setting window will pop out as Error! Reference source not
found., after filling up the data that you want to change, you must fill up the
password and press the "Set" to process the data changed immediately.
15