Table of Contents
Advertisement
2-2-8. LED-433 Board
Removal
1. Remove the upper panel assembly.
(Refer to step 1 in Section 1-4-1.)
2. Remove the front panel assembly.
(Refer to step 2 in Section 1-4-3.)
3. Remove the two screws, and remove the
LED-433 board.
4. Disconnect the harness from the connector
CN930 on the LED-433 board.
Installation
5. Reinstall the LED-433 board in the reverse
order of steps 3 and 4.
6. Reassemble the unit in the reverse order of
steps 1 and 2.
2-10 (E)
CN930
PSW3 x 6
LED-433 board
PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
Advertisement
Table of Contents
