Operation Check In Self-Diagnosis Mode - Sony PCS-G70N Service Manual

4-1-4. Operation Check in Self-diagnosis Mode

START
No
Application image file
update completed?
Yes
Connect the terminal PC to
the unit with serial interface,
and turn on the power
of the unit.
Is the following prompt
No
displayed by pressing the
return key after the
message is stopped?
pcsdb>
Yes
Are the connection of
cable and connector, and
the communication setting
conditions correct?
Start Diag mode from
the application by inputting
the following command.
pcsdb>goto diag
BT-00
Check the
IC101, IC2105/CPU-382,
and the peripherals.
AD-00
PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
No
Set correctly.
Update function block simple check
Yes
Is the following
message displayed after
the Memory Stick is
inserted or removed?
When Memory Stick is inserted (Example)
filecnt<38.885>ms status change (Insert)
opecnt <38.885>opecnt> Poweron req illegal state (not standby/sleep)
rfilecnt<39.633>MS Info:
filecnt<39.647>MS init succeed!!
opecnt <39.649>opecnt> Mscnt [INSERT]
When Memory Stick is removed (Example)
filecnt<11.070>ms status change (Eject)
filecnt<11.571>MS eject
opecnt <11.572>opecnt> Mscnt [EJECT]
FFC: Flexible flat cable
BT: Automatic check item during boot-up
AD: Diag check item by entering "auto" command
Update the file to the
No
latest version.
Is updating complete?
(Check the screen.)
Yes
Turn off the power, and start Diag mode directly.
(Turn on the power while pressing
[CTRL]+D keys by terminal PC.)
Memory Stick is used.
What is used for
updating?
Check the following
. IC504/CPU-382,
No
and the peripherals
. MS- 73 board
. FFC in the unit
Yes
Media : STD [16MB]
OS Type: 01, Total Sector: 31591
opecnt> Not found Private Phone Book
opecnt> Mail to Uicnt [MS INSERT]
opecnt> Mail to Uicnt [MS EJECT]
. Program data in the Memory Stick is old.
. Incorrect folder
BT-00
AD-00
FTP is used.
Check the following
. IC2001/CPU-382,
and the peripherals
. FTP setting (PC side)
. IP address (unit side)
. Ping sending testing
4-3 (E)