2-2-9. SW-1259 Board
Removal
1. Remove the top cover assembly.
(Refer to steps 1 to 3 in Section 1-4-1.)
2. Remove the front panel assembly.
(Refer to step 2 in Section 1-4-3.)
3. Disconnect the harness from the connector
CN202 on the PS-686 board.
4. Remove the SW-1259 board in the direction
of the arrow.
Installation
5. Reinstall the SW-1259 board in the reverse
order of steps 3 and 4.
6. Reassemble the unit in the reverse order of
steps 1 and 2.
PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
SW-1259 board
PS-686 board
CN202
2-11 (E)