Lenovo Robotic User Manual page 12

Installation Instructions
remove
4) Before use, be sure to
bumper to ensure proper operation of the cleaner.
5) Powering and Charging
Method 1: Press and hold the Power button key to power on.
Wait for the ring indicator to light up and place the main
machine within one meter of the charging dock. By tapping
the charging button,the device will automatically search for
the charging dock and go to charge.
Method 2: Place the Robot vacuum near the charging dock
and align it with the charging electrode strip. The power
indicator on the charging dock will be off and the cleaner will
automatically power on and starts charging by default. After
the device is turned on, it can be usde normally.
Note: If the battery is low, the machine will not turn on. Please place the
main machine on the charging dock and the device will start automati-
cally. The power of the device should be≥30% before it can work.
the protective strip on the
Charging Dock
Please pay attention to align main
machine with the charging
electrode strip
Note: Before charging, wipe the robot vacuum charging pad with a dry
rag, and put aside the side brush at the same time to prevent the poor
contact coming from side brush or dust.
6) Download the mobile phone APP
Search for "Lenovo Cleaner X1" in Google Play or Apple
store then find its App and download it. Follow the APP to
configure the network of the device.
Note: When the mobile phone is not connected to the cleaning
robot, please refer to the "User's Manual" - "Reset Wi-Fi" to operate.
9
Main machine