Dust Bin And Filter - Lenovo Robotic User Manual

Routine Maintenance

Dust bin and Filter

Step1
Step1: Open cover to remove the dust bin.
Step2: Open the dust bin buckle and empty the dust bin. To avoid spilling the dust, keep the top cover of the dust bin facing
up. hold the top cover with your right hand and the transparent dust bin with your left hand. To avoid clogging of the filter
element, tap the dust bin when you empty it (it is recommended to clean it at l east once a week).
Step3: After a longer period of use, remove the filters component : the high-efficiency HEPA washable filter (It is recommended
to replace a set of filters every 6-12 months to ensure good cleaning results).
Step4: Rinse dust bin and filters (not too frequent, recommended monthly cleaning).
Step5: After rinsing, dry the water droplets. Be sure to dry Dust bin and filters completely before reinstalling them to ensure the
lifetime of the device.
Note: •
Please rinse with clear water without any detergent. Please do not clean the flier with brush or fingers.
•
Do not put an incomplete dust bin into the device which can avoid the air flow channel (wind channel) to be blocked or damaged when cleaning.
Step2
Step4 Step5
16
Step3