Firmware Upgrade - Lenovo Robotic User Manual

Routine Maintenance
Charging electrode strips
The part, as shown in the diagram, is the charging
electrode strips. Please clean the charging electrode
strips of Robot and the charging dock with a dry rag
(Please turn off the electricity when cleaning. It is
recommended to clean it monthly).
Charging electrode plates
Battery
• Robot has a built-in high-performance rechargeable
lithium battery pack. To maintain battery performance,
please always keep Robot charged for daily use.
• If the Robot will not be used for a long time, please
power off and store it. The Robot should be fully charged
at least once every three months to avoid the battery
damage due to over draining.
Charging electrode strip

Firmware Upgrade

The firmware can be upgraded through the phone App.
After detecting the new firmware, follow the prompts to
carry out the upgrade. When the firmware is upgraded,
power needs to be at least 50%. It is recommended to
place Robot on the recharging dock for firmware upgrade.
Reset
Open the cover, and there is a small round hole next to the
silk screen print "Reset"(see the picture below), please
poke it, then the Robot will reset and power off.
19
Reset