Simultaneous Run/Stop For Each Block; Simultaneous Run/Stop For Block - Hitachi PSC-A32MN Operation Manual

7.4 Simultaneous Run/Stop for Each Block
(3)
NOTES:
• "Run/Stop by Block" command will not be effected to the blocks specified in "Exception Setting of Run/Stop
Operation".
• In case that the Ice Storage Series is connected, the Air Conditioner Unit cannot operate while the Heat Storage
Unit is operating.
P5415644
(1) Select the target block from
(1)
the touchscreen display to set
simultaneous Run/Stop operation.
(2) Tap "Run by Block" when the
selected Block runs simultaneously.
Tap "Stop by Block" when
the selected Block stops
simultaneously.
(2)
(3) The confirmation screen will be
indicated.
Tap "Yes".
All groups (all indoor units) in
the selected block connected
to the central station will be
simultaneously operated.
Tap "No" to cancel this command.
11