Run/Stop Operation For Each Group (Control Mode (Run/Stop Only): "Enable") - Hitachi PSC-A32MN Operation Manual

7.5.2 Run/Stop for Each Group (Control Restricted (Run/Stop Only) : "Enable")
<Monitor (All Groups)>
(1)
(2)
<Monitor (Block)>
(1)
(2)
NOTE:
In case that the Ice Storage Series is connected, the Air Conditioner Unit cannot operate while the Heat Storage
Unit is operating.
P5415644
(1) Select the target group at screen of
"Monitor (All Groups)" in "Run/Stop
Only" mode.
(2) The selected group operation is
alternately changed by tapping as
follows.
"Stop" "Run"
In this mode, simultaneous Run/
Stop operations for all groups is
available by "Run all gr." and "Stop
all gr." buttons.
Refer to the item 7.3 for details.
(1) Select the target group at screen of
"Monitor (Block)" in "Run/Stop Only"
mode.
(2) The selected group operation is
alternately changed by tapping as
follows.
"Stop" "Run"
In this mode, simultaneous
Run/Stop operations for block is
available by "Run by Block" and
"Stop by Block" buttons.
Refer to the item 7.4 for details.
13