Setting Temperature; Setting Temperature - Hitachi PSC-A32MN Operation Manual

7.9 Setting Temperature
<Monitor (All Groups)>
(1)
(3)
NOTES:
• By tapping "<" or ">" at the detailed setting screen, the Setting Temperature will be switched to another group in
the same block.
• Control Restricted (Run/Stop Only) : In case of "Enable", each Setting Change is for all Groups or Blocks.
Setting Change is not possible for each Group.
• The figure above shows an example of the setting temperature for a connected Air Conditioner Unit.
The setting temperature range may not be indicated in certain case.
• If the settings are mixed when multiple groups are selected, the display will remain blank.
P5415644
<Monitor (Block)>
(1)
(2)
(1) Select the target group at screen of
"Monitor (All Groups)" or "Monitor
(Block)" to change the setting
temperature.
The pop-up of "Setting" for the
selected group is displayed on the
touchscreen.
(2) By tapping " ", the temperature is
o
increased by 1 C. (Max. 30
By tapping " ", the temperature is
o
decreased by 1 C.
* At Cooling, Dry, Fan and Auto
o
operation: Min. 19
* At Heating operation: Min. 17
(3) Tap "Monitor screen" to return to
Monitor screen.
o
C)
C
o
C
17