Kenwood DDX3028 Service Manual page 13

While executing MICROPHONE TEST
Retain the above screen until [EXIT] key is pressed.
BT MICROPHONE TEST
IN PROGRESS...
BACK
BAC h EXIT
MICROPHONE TEST completed
BT MICROPHONE TEST
FINISHED
BACK
∗ This mode can be cleared only by turning the power OFF.
([BACK] / [EXIT] keys prohibited)
2-8. BT DONGLE CHECK MODE
Mode for checking if the Telechips module USB terminal
operates electrically normally.
The screen below is displayed.
BT DONGLE CHECK MODE
PLEASE INSERT BT DONGLE
BACK
TEST MODE
Also display the following after acknowledging BT dongle
insertion.
∗ Also display the same if the dongle had been inserted.
BT DONGLE CHECK MODE
OK
EXIT
BACK
BACK: Bring back to the previous layer.
EXIT: Bring back to the normal screen.
Display the following if something other than BT dongle is
inserted.
BT DONGLE CHECK MODE
NG
PLEASE INSERT BT DONGLE
EXIT
BACK
BACK: Bring back to the previous layer.
EXIT: Bring back to the normal screen.
2-9. FIRM UPDATE MODE
Refer to the "FIRM UPDATE MODE".
3. DVD CHECK MODE display specifi cations (Layer 2)
Directly touch the item to select the operation.
DVD CHECK MODE
NORMAL PLAY
XXXX XXXX
NORMAL PLAY
EXIT
EF OUT-TRACKING OFF
EF IN-TRACKING OFF
CD-LASER ON
DVD-LASER ON
∗ DVD CHECK MODE is cleared by power OFF (Clear by
ACC OFF/ BATTERY OFF).
∗ 2nd and 3rd lines are not displayed immediately after go-
ing into DVD CHECK MODE. 2nd and 3rd lines are dis-
played as the items are selected.
DDX3028/3048/3058/318/4038/4038M
DDX4028BT/4038BT/4038BTM/4048BT/4058BT/418
2nd line: Item
1st line: Title 3rd line: Data
DVDx1 JITTER MODE
SEARCH & JITTER
MONITOR
DVDx1 PLAY
STOP
EJECT
LOAD
SLEEP
EEPROM DATA OSD
EXIT
EXIT
13