Table of Contents
Advertisement
5.6
Notes on the operation of the BEKOKAT
DANGER
Blow-off compressed air at the safety valve
Contact with rapidly escaping compressed air from the safety valve may
result in serious damage to persons.
When working on the assembly unit (maintenance / inspection / repair), make
sure that the permissible operating pressure is not exceeded. Be careful
when blowing off the safety valve. The operating personnel must be
instructed by the operator of this possible danger.
NOTE
For the operation of BEKOKAT
1.
The assembly unit is switched on and off with the main switch S0 and
Start switch S1.
2.
The display A1 shows the reactor temperature.
3.
At nominal conditions, the reactor temperature sets between + 145 °C
and + 160 °C.
4.
The BEKOKAT
5.
If a heating system fails, please contact the BEKO customer service.
6.
If faults occur during operation, please inform the responsible service
technician.
V01 / 11-043
Installation and Operation Manual BEKOKAT
®
please be aware of the following notes:
®
works fully automatically during operation.
®
®
65 / 88
Advertisement
Table of Contents
